Fume Extraction System

The need for local exhaust ventilation: Solder fumes irritate eyes, nose and throat of workers. They also cause problems if the fumes accumulated on equipment. For these reasons, we recommend a fume extractor.

There are different types of fume extractors for a factory environment.

VAC-4000

If there is no duct near the work space, use VAC-4000 with VAC-1000.
Three carbons filters make solder fumes and exhaust clean.

The extraction tubing is mounted in close proximity to the iron unit and safely removes solder & flux fumes.

VAC-4000 Specifications

FILTRATION RATE More than 95%
PARTICLE FILTER AREA Ejector
AIR CONSUMPTION 0.5Mpa (Dry Air)
DIAMETER Below 82dB
HEIGHT 194(W) x 170(D) x 308(H) mm
WEIGHT Approximately 4.0kg