Solder Wire Pre-Heat Tube

The stainless steel sleeve is equipped with two heaters to pre-heat the solder wire as it is being fed. This helps to prevent solder ball spattering by pre-heating the solder wire & internal flux. Is designed to be used with larger diameter solder wire and is effective in reducing tact/cycle time as well as improving quality in lead free & tin/lead applications.

WPH 1 205 PRE HEAT TUBEYPH 10 1 205 PRE HEAT TUBE

Tact time

By minimizing the decrease in temperature caused by touching the solder tip at room temperature, to achieve shorter cycle time.

Extend the life of the tip

By preheating the solder, lowering the set temperature of the tip will be possible. You can extend the life of the tip and reduce the thermal oxidation.

Product Specifications

Controller Model
WHP-L Vertical for J-CAT
WHP-S Vertical for L-CAT-EVO
Input Voltage AC100 ~ 240V
Maximum Power Consumption 20w
Control Voltage DC5V ~ DC19V
Temperature (Variable volume knob) 40 ℃ ~ 185 ℃
Dimensions (Controller) 150 (W) × 90 (D) × 50 (H) mm

Feed Tube

L-CAT-EVO TAL1.0-450WH120
J-CAT TAL1.2-650WH120