The point soldering station operates in five major mode categories, one of which is the Customizing Mode. When the point soldering station is active in this mode, the 「CUSTOM」LED on the Teaching Pendant is lit. The Customizing Mode allows the user to set up their own Teaching menu and create data for inclusion in operating programs. In addition, by setting up and logging into their own accounts users can restrict access to customized data and definitions (except for customized Teaching Mode data) from Teaching Mode or other accounts.
For details about Customizing Mode, refer to Functions IV (Customizing).
Emergency Stop The Emergency Stop functions the same way in the Customizing Mode as it does in the Teaching Mode. When the Emergency Stop Switch is released, the point soldering station reverts to Teaching Mode.

Data Save Save teaching data in combination with customizing data. The unit of data is referred to as C & T data. If the teaching pendant is connected, press the .SAVE. key. If you wish to save data edited on a PC in the robotic point soldering station, send data to the robotic point soldering station using the PC software JR C-Points (option). The data sent from the PC will be saved in the robotic point soldering station automatically. C & T data created using the teaching pendant is stored in the point soldering station temporarily; it will be deleted automatically when the power to the point soldering station is turned off. Be sure to save if you have modified the teaching data or customizing data. To back up the data, send C & T data from the robotic point soldering station to your PC using the PC software JR C-Points (option) or JR C-Points Limited Edition (included in the operation manual CD-ROM) and save it as a file.